| Opcode/Instruction | Op/En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
|---|---|---|---|---|
| NP 0F 28 /r MOVAPS xmm1, xmm2/m128 | A | V/V | SSE | Move aligned packed single precision floating-point values from xmm2/mem to xmm1. |
| NP 0F 29 /r MOVAPS xmm2/m128, xmm1 | B | V/V | SSE | Move aligned packed single precision floating-point values from xmm1 to xmm2/mem. |
| VEX.128.0F.WIG 28 /r VMOVAPS xmm1, xmm2/m128 | A | V/V | AVX | Move aligned packed single precision floating-point values from xmm2/mem to xmm1. |
| VEX.128.0F.WIG 29 /r VMOVAPS xmm2/m128, xmm1 | B | V/V | AVX | Move aligned packed single precision floating-point values from xmm1 to xmm2/mem. |
| VEX.256.0F.WIG 28 /r VMOVAPS ymm1, ymm2/m256 | A | V/V | AVX | Move aligned packed single precision floating-point values from ymm2/mem to ymm1. |
| VEX.256.0F.WIG 29 /r VMOVAPS ymm2/m256, ymm1 | B | V/V | AVX | Move aligned packed single precision floating-point values from ymm1 to ymm2/mem. |
| EVEX.128.0F.W0 28 /r VMOVAPS xmm1 {k1}{z}, xmm2/m128 | C | V/V | AVX512VL AVX512F | Move aligned packed single precision floating-point values from xmm2/m128 to xmm1 using writemask k1. |
| EVEX.256.0F.W0 28 /r VMOVAPS ymm1 {k1}{z}, ymm2/m256 | C | V/V | AVX512VL AVX512F | Move aligned packed single precision floating-point values from ymm2/m256 to ymm1 using writemask k1. |
| EVEX.512.0F.W0 28 /r VMOVAPS zmm1 {k1}{z}, zmm2/m512 | C | V/V | AVX512F | Move aligned packed single precision floating-point values from zmm2/m512 to zmm1 using writemask k1. |
| EVEX.128.0F.W0 29 /r VMOVAPS xmm2/m128 {k1}{z}, xmm1 | D | V/V | AVX512VL AVX512F | Move aligned packed single precision floating-point values from xmm1 to xmm2/m128 using writemask k1. |
| EVEX.256.0F.W0 29 /r VMOVAPS ymm2/m256 {k1}{z}, ymm1 | D | V/V | AVX512VL AVX512F | Move aligned packed single precision floating-point values from ymm1 to ymm2/m256 using writemask k1. |
| EVEX.512.0F.W0 29 /r VMOVAPS zmm2/m512 {k1}{z}, zmm1 | D | V/V | AVX512F | Move aligned packed single precision floating-point values from zmm1 to zmm2/m512 using writemask k1. |
| Op/En | Tuple Type | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
|---|---|---|---|---|---|
| A | N/A | ModRM:reg (w) | ModRM:r/m (r) | N/A | N/A |
| B | N/A | ModRM:r/m (w) | ModRM:reg (r) | N/A | N/A |
| C | Full Mem | ModRM:reg (w) | ModRM:r/m (r) | N/A | N/A |
| D | Full Mem | ModRM:r/m (w) | ModRM:reg (r) | N/A | N/A |
Moves 4, 8 or 16 single precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load an XMM, YMM or ZMM register from an 128-bit, 256-bit or 512-bit memory location, to store the contents of an XMM, YMM or ZMM register into a 128-bit, 256-bit or 512-bit memory location, or to move data between two XMM, two YMM or two ZMM registers.
When the source or destination operand is a memory operand, the operand must be aligned on a 16-byte (128-bit version), 32-byte (VEX.256 encoded version) or 64-byte (EVEX.512 encoded version) boundary or a general-protection exception (#GP) will be generated. For EVEX.512 encoded versions, the operand must be aligned to the size of the memory operand. To move single precision floating-point values to and from unaligned memory loca-tions, use the VMOVUPS instruction.
Note: VEX.vvvv and EVEX.vvvv are reserved and must be 1111b otherwise instructions will #UD.
EVEX.512 encoded version:
Moves 512 bits of packed single precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load a ZMM register from a 512-bit float32 memory location, to store the contents of a ZMM register into a float32 memory location, or to move data between two ZMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 64-byte boundary or a general-protection exception (#GP) will be generated. To move single precision floating-point values to and from unaligned memory locations, use the VMOVUPS instruction.
VEX.256 and EVEX.256 encoded version:
Moves 256 bits of packed single precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load a YMM register from a 256-bit memory location, to store the contents of a YMM register into a 256-bit memory location, or to move data between two YMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 32-byte boundary or a general-protection exception (#GP) will be generated.
128-bit versions:
Moves 128 bits of packed single precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load an XMM register from a 128-bit memory location, to store the contents of an XMM register into a 128-bit memory location, or to move data between two XMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 16-byte boundary or a general-protection exception (#GP) will be generated. To move single precision floating-point values to and from unaligned memory locations, use the VMOVUPS instruction.
128-bit Legacy SSE version: Bits (MAXVL-1:128) of the corresponding ZMM destination register remain unchanged.
(E)VEX.128 encoded version: Bits (MAXVL-1:128) of the destination ZMM register are zeroed.
VMOVAPS (EVEX Encoded Versions, Register-Copy Form)
(KL, VL) = (4, 128), (8, 256), (16, 512)
FOR j := 0 TO KL-1
i := j * 32
IF k1[j] OR *no writemask*
THEN DEST[i+31:i] := SRC[i+31:i]
ELSE
IF *merging-masking*
; merging-masking
THEN *DEST[i+31:i] remains unchanged*
ELSE DEST[i+31:i] := 0
; zeroing-masking
FI
FI;
ENDFOR
DEST[MAXVL-1:VL] := 0
VMOVAPS (EVEX Encoded Versions, Store Form)
(KL, VL) = (4, 128), (8, 256), (16, 512)
FOR j := 0 TO KL-1
i := j * 32
IF k1[j] OR *no writemask*
THEN DEST[i+31:i] :=
SRC[i+31:i]
ELSE *DEST[i+31:i] remains unchanged*
; merging-masking
FI;
ENDFOR;
VMOVAPS (EVEX Encoded Versions, Load Form)
(KL, VL) = (4, 128), (8, 256), (16, 512)
FOR j := 0 TO KL-1
i := j * 32
IF k1[j] OR *no writemask*
THEN DEST[i+31:i] := SRC[i+31:i]
ELSE
IF *merging-masking*
; merging-masking
THEN *DEST[i+31:i] remains unchanged*
ELSE DEST[i+31:i] := 0
; zeroing-masking
FI
FI;
ENDFOR
DEST[MAXVL-1:VL] := 0
VMOVAPS (VEX.256 Encoded Version, Load - and Register Copy)
DEST[255:0] := SRC[255:0] DEST[MAXVL-1:256] := 0
VMOVAPS (VEX.256 Encoded Version, Store-Form)
DEST[255:0] := SRC[255:0]
VMOVAPS (VEX.128 Encoded Version, Load - and Register Copy)
DEST[127:0] := SRC[127:0] DEST[MAXVL-1:128] := 0
MOVAPS (128-bit Load- and Register-Copy- Form Legacy SSE Version)
DEST[127:0] := SRC[127:0] DEST[MAXVL-1:128] (Unmodified)
(V)MOVAPS (128-bit Store-Form Version)
DEST[127:0] := SRC[127:0]
VMOVAPS __m512 _mm512_load_ps( void * m);
VMOVAPS __m512 _mm512_mask_load_ps(__m512 s, __mmask16 k, void * m);
VMOVAPS __m512 _mm512_maskz_load_ps( __mmask16 k, void * m);
VMOVAPS void _mm512_store_ps( void * d, __m512 a);
VMOVAPS void _mm512_mask_store_ps( void * d, __mmask16 k, __m512 a);
VMOVAPS __m256 _mm256_mask_load_ps(__m256 a, __mmask8 k, void * s);
VMOVAPS __m256 _mm256_maskz_load_ps( __mmask8 k, void * s);
VMOVAPS void _mm256_mask_store_ps( void * d, __mmask8 k, __m256 a);
VMOVAPS __m128 _mm_mask_load_ps(__m128 a, __mmask8 k, void * s);
VMOVAPS __m128 _mm_maskz_load_ps( __mmask8 k, void * s);
VMOVAPS void _mm_mask_store_ps( void * d, __mmask8 k, __m128 a);
MOVAPS __m256 _mm256_load_ps (float * p);
MOVAPS void _mm256_store_ps(float * p, __m256 a);
MOVAPS __m128 _mm_load_ps (float * p);
MOVAPS void _mm_store_ps(float * p, __m128 a);
None.
Non-EVEX-encoded instruction, see Exceptions Type1.SSE in Table 2-18, “Type 1 Class Exception Conditions,” additionally:
|
#UD EVEX-encoded instruction, see Table 2-44, “Type E1 Class Exception Conditions.” |
If VEX.vvvv != 1111B. |